No, you don’t. The hardware of the ISOBLOK system is not only a cable harness that contains passive components like connectors and cable, it has a microcontroller that preprocesses the ISOBUS communication messages. Together with the ISOBLOK app it gives a complete ISOBUS UT solution, no need for anything else.

You can use your tablet or phone as an ISOBUS terminal of your agricultural machinery, connecting your ISOBUS implement.

The type of the tractor doesn’t have any effect on using the ISOBLOK.

All implements can be connected that have an ISOBUS outlet that has VT3 UT version or higher.

For the time being, tablets or mobile phones can be used running Android operating systems. We recommend versions higher than Android 8.1. We are working on the iOS support. Please subscribe to our newsletter to be the to be notified about the release of the iOS version.

We designed the app to be intuitive. On the other hand the app displays your implement’s own control surface, so if you are used to control your implement on its own user surface, there will be no change.

No, you don’t. You can use your standard mobile device, let it be a tablet or a mobile phone.

The ISOBLOK hardware package contains all connectors and the cable harness with the ISOBLOK unit and a User Manual. The ISOBLOK app shall be downloaded separately.

The system has been already tried and used with several different types of implements, such as: Amazone sprayer: UX 3200 Special, UX 6201 Super Amazone spreader: ZA-V 2200, ZA-TS 3200, ZA-V 2700 Profis Tronic Bednar seed drill: EFECTA CE 12000 Bednar disk harrow: ATLAS AE 12400 Bogballe spreader: M LINE PLUS Claas baler: Variant 360 DCM spreader: M36 S Digitroll seed-monitor: XeedGATE Fendt baler: Rotana 180 v Fliegl trailer: Gigant ASW 381 Horsch seed drill: Pronto 4 DC, Pronto 6 DC, Maestro 12 CV, Maestro 24.50 SV John Deere seed drill: 750 A Krone baler: BIGPACK 1270 XC, COMPRIMA F 155 XC Kverneland drill: Optima V6 Müller sprayer controller: MIDI 1.0 MachineryGuide sprayer controller: BSC, BHC MachineryGuide liquid fertilizer applicator: FLUXX Rauch spreader: AXIS H 30.2 Vaderstad seed drill: Rapid A 600S

Yes, you can equip. The aim of the ISOBLOK is to upgrade your old tractor’s capability to use ISOBUS implements.

It’s not rocket science, however you’ll need competent access to your tractor’s battery for power supply and some tools to fix the ISOBLOK connector outside of the cabin. Please study the User Manual before installation.

You’d need tools but the ones you have in your workshop we’ll do the job. Please study the User Manual before installation.

The ISOBLOK has to be connected directly to your tractor’s battery and needs 12V power supply. The system cannot be used with a 24V power supply!

On the cable harness’ junction box there is a USB-A connector.

If you have a device running Android, please download the ISOBLOK (ISOBUS UT) Android app from Google Play. Devices running iOS are not supported yet, but we are working on the iOS app release. Please subscribe to our newsletter to be the first to be notified.

You need an internet connection only to download the app.

Yes. The ISOBLOK connector part can be installed outside the cabin.

You can download and try the ISOBLOK app without the hardware, which will function as a demo version with simulated implements.

Yes, you can download the ISOBLOK (ISOBUS UT) Android app from Google Play.

Not yet, we are working on it and it will be published soon. Please subscribe to our newsletter to be the first to be notified.

The ISOBLOK app without the hardware functions only in demo mode. You need the ISOBLOK hardware to connect to ISOBUS implements.

You need the ISOBLOK app installed on a mobile device when using the ISOBLOK hardware to display the implement’s ISOBUS UT functions.

With ISOBLOK the UT function of ISOBUS is available, which means the display can load the User Interface of the connected implement. Through the User Interface you can manually control the machinery. Furthermore the ISOBLOK system can provide a speed signal (e.g. for a spreader’s app-rate control regulation)

Yes, the ISOBLOK is intended to relieve you in such situations. The ISOBLOK is worthwhile to have as a backup solution until your existing ISOBUS UT is repaired. We set the price of the system so you could keep it close for rescue.

You are at the right place. The aim of the ISOBLOK is to upgrade your tractor’s capability to use ISOBUS implements. We set the price of the system so you can equip more tractors individually with ISOBLOK so you can even use all of your tractors as capable of ISOBUS implements.

You can save time and money if you let all of your tractors be ISOBUS capable. There is no downtime to wait for the only ISOBUS capable tractor. In this way you can multiply your potential. You do not need separate displays as well for each ISOBLOK system, one display can be used with each.

Nowadays nearly everybody uses a mobile device, so the ISOBUS terminal can be literally in your pocket.

Yes, you can save. The more tractors are equipped with ISOBLOK the less downtime you have to wait for the only ISOBUS capable tractor. In this way you can multiply your potential.

If you have ISOBLOK on all of your tractors,you can use any available tractor at the right time with your ISOBUS implement. This can end up in fuel saving.

Turning your mobile device into an ISOBUS terminal, upgrading your tractors to ISOBUS capability, having a backup solution until service arrives in case of an ISOBUS terminal breakdown - these are just a few of the benefits that will save you time, money and will save you worries. Many ISOBUS implements e.g. balers, trailers or different types of tillage machines do not need special functions such as an automatic section control. In these cases the ISOBLOK is a perfect solution. For the rest of the machines ISOBLOK can be a good backup solution.

ISOBUS is a standard protocol that's becoming more and more popular and even necessary in the long term. The more manufacturers offer ISOBUS implements the greater is the need to be able to adopt. ISOBLOK helps you to plan ahead for the change. In some regions ISOBLOK can be a tool that increases the precision level of your farm and machinery.

Use the ISOBUS terminal for the main implement in the current session and use the ISOBLOK as the supplementary controller for the other implement.

Sure, the ISOBLOK app can load up to eight Implements Object Pool (IOP) at the same time. This means you can use up to eight machines simultaneously.

1. Compared to the existing solutions on the market, ISOBLOK is a very cost-effective solution to enter the world of ISOBUS technology even if you don’t have any ISOBUS machine or tractor yet. We think purchasing a display solution before investing into an ISOBUS-capable implement, sounds reasonable. 2. If you already have an ISOBUS terminal, but not all of your tractors are equipped with an ISOBUS display, you can easily spread the ISOBUS technology to your complete tractor-fleet. 3. If you already have ISOBUS terminals in all of your tractors, then itS still reasonable to have a backup solution, to avoid any delay in your time-critical agricultural activities. 4. If you already have an ISOBUS terminal in your tractor, but handling the guidance- and implement functions with only one display is not comfortable for you. The ISOBLOK can be used as a multiscreen solution, an extension to your existing ISOBUS Terminal. 5. If you are an agricultural machinery dealer, or an agricultural machine manufacturer, you can offer the ISOBLOK along with your ISOBUS machinery. In this way you can broaden your customer base with those who don’t have an ISOBUS compatible tractor yet. 6. If you are a service provider and you have a 24/7 service offer for farmers which is really difficult to keep in the high season. You can Provide them the ISOBLOK as a backup solution until your help arrives. 7. If you are a farmer who wants to sell an ISOBUS implement but your buyer doesn’t have an ISOBUS capable tractor. You can still sell the machine suggesting or providing the ISOBLOK

No, you don’t. With your purchase of the ISOBLOK package you can use the app free of charge.

All customs and taxes are calculated in the shipping cost. We deliver DDP (Delivered Duty Paid).

No. We accept only payments online.

Yes, it’s possible to pay by card at checkout.

We accept any debit- and credit cards.

Yes, if you pay on your Android device, Google Pay is available.

Yes, if you pay on your Apple device, Apple Pay is available.

For the moment PayPal is not supported.

Shipping cost depends on the region you order from. We calculate shipping costs uniquely at checkout.

Within our shipping regions it usually takes 3-5 business days. Exceptions may occur. (e.g. the ISOBLOK units are out of stock - it is indicated in the cart -, then the delivery time can be 3-4 weeks.)

Yes, for every order we provide the courier’s tracking number.

We ship our packages from the European Union.

We warrant (1) year within our Terms and Conditions.

For this case you can find guidelines in our Terms and Conditions.

First of all, be sure that you read the FAQs carefully. If you still haven’t got your question answered contact us through e-mail.

If you want to become a dealer, please contact us directly through e-mail.

Definitely yes. If you subscribe, you’ll be the first to receive information about our latest developments, upgrades, news and seasonal deals.

Yes, you can go through purchasing as a guest.

Not yet. If you want to become a dealer, please contact us directly.